Having the red danger sign of decaying battery or internal fault. Replacing the battery pack should get your Dyson up & run.
The Dyson v6 battery not charging issue
Sometimes the Dyson v6 may not hold a charge. Even the charger light will show but when you use it it won’t last long. If you are the unfortunate one in this scenario then there are some methods you can follow.

Old Dyson
For the case of an old Dyson, you have to check whether the batteries are faulty.
So you need to replace the batteries.
New Dyson
Now let’s look at what to do if this was the case for a new Dyson v6. Press the on button for around 20 seconds. It’s not that this will work, but it’s worth a try. Blocked air paths can also cause such malfunction.
What Does the Red Blinking Light on Dyson Mean?
Dyson v6 has a small LED light to show the state of the machine. One such LED sign is the blinking red light. This indicates that there is a serious fault in the machine.
Whenever you face such a scenario, turn off the vacuum immediately. After that contact the Dyson Helpline for further correspondence. This means either the battery or charging has a problem.

How Do I Fix the Flashing Red Light on My Dyson V6?
Red means a problem. The same goes for the Dyson v6 vacuum. In this scenario, the vacuum is at a standstill & the LED is blinking red. The low voltage of the 18650 lithium-ion cell causes such distress.

12 Times Blinking Issue
One of the more cases for the blinking red light is that your battery needs a change. Dyson batteries usually have a lifespan of about 3 to 4 years.
But if you treat the vacuum, then it might decay sooner. With 12 times blinking red light, you need to replace the battery of your Dyson v6.
Clogged Air Gaps
Check if the pipes are all okay. Sometimes due to excessive clogging of the air paths, the LED blinks red. All sorts of debris can clog the filter.
Filthy Filter
There is a central cloth filter that is removable from the top of the canister. You need to pull it out & separate it at the snap ring.
Then rinse the cloth with soap water. After reassembling the part, your vacuum should be up & running.
The Reset Button
Some users have found a trick to fix this problem. First, you need to unplug the charger, then plug it again. After that attach your Dyson & press the on button for around 20 seconds.
Contacting Dyson Support
If your problem is still not solved, then you need to contact Dyson support. It’s better to leave it to the expert to see what the problem is.
Dyson’s support is very much helpful in these matters. And if you still have a guarantee, you are in luck.

Fixing Dyson v6 Red Light Flashing 32 Times
We have discussed in the earlier section about the red blinking LED of the Dyson v6. When you have this LED blinking about 32 times, this is an omen of death. That means that your battery is dying.
This occurs when you have 25% less runtime for the vacuum. Using your vacuum with a faulty battery can become harmful to your machine. That’s why you need to change the battery when the 32 blinking problems occur.

How Do I Reset My Dyson v6 Battery?
Sometimes the best way to get your vacuum up & running is to reset. You may not use your machine on a regular basis. So it might need a jump start or something to shape. If you hold down the start button for 20 seconds, it will give your vacuum a rebirth.

Replacing the Battery on a Dyson V6
Replacing the battery on a Dyson v6 is not rocket science. With some common knowledge, you can do it. Before attempting to replace the battery unplug the device.

Opening the Bin
There is a red lever located outside the bin. Push the lever down 2 times. The second time, the bin will be open. Don’t press the trigger on the opposite side as it will run the motor.

Unscrewing the Battery Pack
Pull the bin away. Then you need to unscrew the screw on the battery pack & device handle. After unscrewing the device handle the battery pack should be free. Then you pull the battery down & replace it with a new one.

FAQ
Q: What is the main reason for a red flickering light on a new Dyson v6?
Ans: Sometimes with so many manufactured machines, a few may have faulty batteries. On such occasion, if the reset button does not work for you, contact the
Dyson supports to claim your warranty.
Q: Is it safe to leave the Dyson v6 on charge all the time?
Ans: The design of the Dyson v6 is such that you can leave it charging all the time. After it has charged fully, it won’t consume any more electricity. So it’s safe to leave it like that.
Conclusion
Dyson having problems with the red flickering light is not new. Following the above-mentioned ways can help you solve your problems in most cases. But sometimes you might not find success. That’s when you need to call Dyson customer support for troubleshooting.
Also read-Riccar vs Dyson | a Comprehensive Comparison Between Two Popular Brand
Leave a Reply