The best practice to keep your vacuum cleaner running as new for years is cleaning its filters. A Hoover bagless vacuum cleaner consists of two filters. The primary one rests on top and the HEPA filter at the bottom. For optimal performance, you must clean the top filter every month and the bottom filter every six months.
Are Hoover Vacuum Filters Washable?
Yes, they are, or maybe not. Vacuums that come with washable filters are great. Note that not all the filters of a Hoover vacuum are washable. As mentioned earlier, you will find two removable filters inside. The primary filter that sits right on top of the dirt cup is washable. You can rinse it with water without giving a second thought.
However, the HEPA filter uses various fibers to trap dirt, debris, and allergens. Hence, you cannot wash it and should better keep it away from moisture. Apart from these two filters, there lies a cyclonic filter assembly inside the dirt cup. In case you want to clean it, keep in mind that it’s not washable either.
How to Clean Hoover Bagless Vacuum Filter?
Pick a day on which you won’t be needing the cleaner. With that out of the way, get into action by putting the cleaner in an upright position. Before unplugging the power cord, make sure you have switched the vacuum cleaner off. Now, press the release button on the handle to detach the dirt cup from the vacuum.
Once the dirt cup is free, you can flip its upper lid and get to the primary filter. Removing the filter should be pretty easy for you. Since this filter is washable, find a place where you can get a hot water supply. Rinse the filter with water for a few minutes until you see no dirt coming off.
Although the filter is now clean as new, you cannot restore it right away. Note that if you put a wet filter inside, it will cause the cleaner to get clogged faster. So, leave it there to dry for at least 24 hours before installing. Once it is dry as a bone, put the filter back, flip the lid close, and attach the dirt cup in place.
How to Clean Hoover Pet Vacuum Filter
Cleaning the filter on your Hoover pet vacuum cleaner is pretty much the same. Access the filter by pressing the release button and removing the dirt cup. Twist off the top and lift the filter out. The dirty side should be underneath. Rinse the filter under warm water for a minute or two and let it dry for 24 hours.
Empty the dirt cup by pressing down firmly on the release lever on the back. Close the door, and you should hear it click shut. To remove the filter assembly, turn the handle slightly counterclockwise. The entire cyclonic filter assembly will come out as one piece and does not come apart.
Wipe the filter assembly clean using a soft dry cloth. Never should you use water to rinse it. Once you’re done with wiping off, put the filter assembly back into the dirt cup. Then, turn the handle clockwise until it locks. To replace the dirt cup, set in the bottom edge first, and pivot the top until it clicks into the lock position.
Hoover Windtunnel Hepa Filter Cleaning
You have to disassemble the Hoover WindTunnel part by part. Reach down to the place in the vacuum where it says HEPA. Put your hands on the clamp and slide the chamber out. There you will find the HEPA filter. Since this is the one that we cannot rinse with water, cleaning it isn’t a big deal.
Carry the HEPA filter near your trash can. Tap it against your hand to let loose all the dirt and debris. You can also use a soft brush to clean it thoroughly. Once done, reattach the filter into place. If you hear a quick snap, rest assured it fitted snuggly, and the vacuum cleaner is ready to roll.
Frequently Asked Questions
Q: Why does my Hoover bagless vacuum cleaner smell so bad?
Ans: A handful of reasons can cause the odor to form, including clogged filters, overstayed dirt inside the cup, or a clogged beater brush. You may need to empty the dirt cup and clean or change the vacuum filters at once. If that doesn’t help, try to unclog the beater brush to get rid of the smell.
Q: How often should I change the vacuum filters?
Ans: Though it depends on how much you use the cleaner, they do have an estimated lifespan. Despite washing and cleaning routinely, you might want to change the rinseable filter once a year. And the HEPA filter should last for at least two to three years if you use the vacuum in a rigorously residential setting.
Bottom Line
Cleaning the vacuum filters not only helps your Hoover vacuum run smoothly but also lets you inspect the damaged parts. Here’s one last tip to increase the lifespan of your cleaner. Always use authorized Hoover parts when it comes to replacing the filters to avoid any hassles whatsoever.
Leave a Reply