There is no plenty of time to worry about the Miele power brush. If your brush doesn’t respond, check out the following actions. Surely, this will help you!

Miele Power Brush Not Working | Reason and How to Fix
Here know the exact reasons why your Miele vacuum cleaner stops spinning or working. Besides, get the outstanding fixing methods too!

Why Did My Miele Vacuum Stop Working?
The following problems generally occur and stop the vacuum often.
Electrical Problem
If there is an electrical problem, your cleaner will never turn on. So, check out your source and the vacuum power cord. The vacuum doesn’t run if it doesn’t get proper power. Make sure it is getting the rated voltage and current.

Overheated Sensor
There is a thermal sensor to measure the temperature inside. If overheating occurs, the sensor immediately releases the command to shut off the machine. Then the sensor will take three hours to reset the vacuum. So, before three hours, the cleaner will not run safely.
Clog in The Back
There may be another reason for the vacuum stop is the clogs in the back portion. Clogs are horrible! A clog in the backstops the airflow. So, if the vacuum stops working casually, check the back part, remove all dirt and clog.
Filter Not Installed Properly
While installing the filter/bag in the vacuum, don’t keep any gap in the housing. Gaps minimize the suction power and free running of the brush. Install the HEPA filter properly. Remove the gaps in the hose.
Blocks in Powerhead
Blocks/jams in the powerhead stop the bush as well as stops the vacuum. So, open the powerhead, check and remove blocks from there once a week. Besides, unclog the brush to increase cleaning efficiency.
How to Fix Faulty Miele Power Brush
Watch the following reactions. Get a smooth brush just like the new one.

- Turn off the vacuum or unplug the power source. If somehow the brush turns on, your hands may damage or you may face injuries.
- Check the brush if there is any obstructor.
- Make sure the brush rotates freely.
- Check by turning on the power. If the reset light becomes red, press the reset button. And that will activate the brush.
- Some models don’t have any reset button. Therefore, they have a switch at the top. Press the switch a couple of times, it will reactivate the brushing.
- After all of these if power brush problems continue to occur, consult with the manufacturers.
Why Vacuum Overheats
Because of overheating, the motor starts to lose power and its efficiency weakens. Sometimes, internal parts get damaged. Reasons for overheating are:
- A filter is not clean.
- A dust bag is not emptied properly.
- If airflow decreases, overheating occurs and shuts the machine. So, clear the hose and brushes.
How to fix
Give importance to fixing this overheating problem. Try these actions and get results fast.
- If the canister or filter bag gets 75% full, clean out fast. If somehow overloaded specks of dust enter the internal chamber, the machine will release heat then.
- Clear the hose, air chamber, and brush. Remove all hair and dirt particles from there. Maintain enough airflow to cool the machine while running.
- Watch if there is any damaged part inside. Broken or faulty parts cause unwanted heat.
- Wash the filter once a month. Filter contains germs, viruses, dirt, and debris. For a clogged filter, the motor works hard to flow air. So, the vacuum overheats.
- Check the vacuum belt. If it is damaged, replace it with a new one.
When Should I Take It to a Repair Shop?
When any of the vacuum body parts get damaged or out of service, then you will have to exchange that with the newest one. After troubleshooting the problem, if you fail to fix it properly, then it is better to bring it to a repair shop. Moreover, to say, to get excellent performance for years, to check safety issues, taking a vacuum to a shop is needed.

FAQ
Q: What materials do Miele HEPA filters contain?
Ans: A HEPA filter works to keep the airflow clean. Moreover, it blocks 99.5 of germ particles, wherever it is major or minor. It is made of heavy-quality multi-ply electrostatic materials.
Q: What if we start vacuuming without drying all parts properly?
Ans: It is a must to dry all parts of your vacuum cleaner for at least 24 hours. Otherwise, without removing water properly from all parts, you may get shocked, the metals of the cleaner may damage and decrease the suction power.
Conclusion
Many problems may occur while using a vacuum cleaner. Therefore, troubleshooting and fixing all problems are comparatively the same for all vacuums available in the market. So, don’t overthink it! Just have a look and solve all power brush problems.
Leave a Reply