Even though vacuums are considered a well-protected appliance, some damage may still occur. When a vacuum cleaner overheats, it can be shut off or even its engine can be damaged and both of them create a hassle.
So, it is important to know what causes the overheating of a vacuum cleaner and how to fix it.
In this article, we will discuss what happens when a vacuum overheats and what you should do if this ever happens to you. We hope, this will be helpful for you!
Problems that Happen When a Vacuum Overheats and Fixes
When a vacuum starts to overheat, it will give out an unusual smell with acrid smoke that comes out of the unit. This can result in an injury if you are too close to the machine when it catches fire.
However, here are some occurrences that happen if a vacuum cleaner gets overheated:
Shuts Off Itself
When a vacuum machine overheats it will shut down and stop sucking until it cools down enough for the internal safety mechanism. When this happens the power switches on automatically itself when air touches the motor housing which can be annoying at times.

Find out the causes that overheat the unit like a clogged filter, leakages in the hose, broken brush roller, etc, and solve the problems as soon as possible to prevent automatic shut-off hassle.
Can Not Spin the Brush Roll
The longer the vacuum runs without a clean air filter, the hotter the motors will get and eventually overheat and stop spinning the brush roll.
Moreover, the brush roller can be clogged with dirt and debris that are not cleaned and this occurs the brush roll is stuck.

If the brush roll cannot turn then the unit gets more heated and thus serious occurrence happens.
To be not tangled in such problems, clean the brush bar regularly after each time using the vacuum cleaner and stay hassle-free!
Damages Motor
If your vacuum cleaner gets overheated then the motor inside turns hot simultaneously. And thus, it gets internally damaged after a certain period of time.
Though there is a safety mechanism that stops the motor automatically after getting it too hot but sometimes it fails to do so as the function is done by a thermostatic sensor and it gets violated when there is excessive heat.

When a vacuum reaches too high temperatures, it can cause the motor to explode too.
To prevent it make sure your vacuum does not get extremely hot by maintaining regular maintenance rules.
Burn Out the Driver Belt
If your vacuum cleaner is overheating then its driver belt gets burned because of the excessive friction with the driver slot.
As overheat is produced by abnormal rotation of the powerful motor and that reason the driver belt is also damaged due to the unit’s overheated driver belt slips.

Depending on how much dust and dirt accumulates in your living room, you have to change the belt in your vacuum cleaner every few months or years.
Loses Suction
Suction losing is another occurrence that happens when a vacuum cleaner gets overheated. As because of overheat influences the belt system to be burned out, the belt slips very often and thus the vacuum loses some suction power.
Vacuum cleaners work by drawing air through a tube and sucking it into a bag. The idea is that if there’s not enough air, no suction power will be created. When the bag gets full, it can cause problems like losing suction.
Basic Maintenance Tips to Prevent Overheating a Vacuum Cleaner
Overheating is a common issue especially when the vacuum cleaner is used for extended periods of time. Many people are nervous about the idea of vacuum overheating. However, it is not as dangerous as one might think.
Normally, vacuums do not get dangerously hot when they overheat and there are some things that you can do to prevent this from happening.
Here are some simple maintenance tips to prevent a vacuum cleaner from overheating:
-Always use the recommended amount of water to fill the tank.
-Do not overload your machine by filling it with more than two-thirds of its capacity.
-Use minimal damp cloths rather than wet ones when cleaning clogged ends, vents, or any other hard-to-reach parts on your machine.
-Clean your vacuum cleaner once every week and make sure you have run it on low settings before restarting it or running on high settings after cleaning.
-Keep the linings in good shape by wiping them regularly with cool water
Does central vacuum overheat?
The answer is yes. It is important to note that central vacuum cleaners can overheat if they are not used properly or if you are using a smaller unit in a very big house.
Can my vacuum explode?
The answer is yes. There are a few factors that contribute to the possibility that your vacuum will explode while in use.
Is a vacuum able burn carpet?
The answer is no, it cannot burn the carpet. Vacuum cleaners have been made with the capability to suck up dirt and dust, not air, and therefore, they can leave a burn mark only on your carpet.
Are vacuums supposed to make heat?
Many people think that vacuums make heat because they pull air in and then release it back out into a room.
However, this isn’t actually the case as they do not have any moving parts that are capable of generating heat.
Conclusion
In conclusion, vacuum Overheating is a common problem of vacuum cleaners. It is caused by reasons like a clogged air filter, clogged hose, full dirt bin, faulty driver belt, excessive-high suction power, etc. You should clean the air filter, clogged hose, and other parts.
A vacuum can overheat in several ways and when the unit gets overheated, it causes things like melting, burning, and explosions.
Now we hope, you know the symptoms that indicate an overheated vacuum cleaner and fixes as well.
And knowing the preventive ways of overheating a vacuum will be helpful for you to use a unit for a long time without any overheating issues.
Leave a Reply