Are you tired of cleaning your home with an Ilife that keeps stopping? One of the most common complaints that Ilife robotic vacuum users have with their products is it keeps stopping after using a certain period of time.
When your robot vacuum keeps stopping, it becomes frustrating and annoying. You may have tried keeping it plugged in the charging dock for hours on end but it still won’t turn on.
For some people, this is a sign that they need to replace their device but there is no need to do so! There are many ways to fix this issue and also there are some preventive ways not to suffer such hassle.
In this article, we will talk about the common causes of stopping an Ilife robotic vacuum cleaner and the solutions as well.
Reasons That Keep Stopping My Ilife Robot Vacuum
When an Ilife Robot Vacuum doesn’t stop completely, it slows down and pauses for a few seconds before continuing on the job. Let’s take a look at some common causes that make an Ilife robot vacuum not move or keep stopping:
Edge Wheels and Side Brush of Your Ilife Vacuum Are Clogged
The Edge Wheels are two rotating wheels to remove dust from the filter of an Ilife vacuum. If the Edge Wheels have failed to clean then think that it clogged up over time with dirt and debris.

The side brushes also get clogged with debris and so it stops moving forward as well as backward.
Ilife Robot vacuum Battery Is Damaged
Running an Ilife robot vacuum, the most important role is played by its battery which can be quite short depending on how frequently it is used.
If you tried to recharge it for hours of charging but could not turn on the device then you have to replace the vacuum battery to make it perform cleaning tasks again.
Charging Base of your Ilife Vacuum Is Not Fine
The most recent vacuum cleaner models are now equipped with a charging base to make it easier for owners to charge their machines. However, the faulty charging base is one of the causes of why an Ilife vacuum cleaner is not working accordingly.
A damaged charging base does not take into account how long the vacuum cleaner takes to fully charge. This means that when you’re vacuuming, it’ll be empty and thus the device will not work properly.
Cleaning Brush Is Clogged
If the cleaning brush gets too clogged with dirt or debris, then it will stop sucking air and the motor will cease to function. To deal with this issue, one has to roll up the top of the brush and clear out as much dirt as possible before turning on the machine again.
With the Ilife vacuum, users can easily clean the brush by turning off the power and unclogging it themselves.
HEPA Filter Is Clogged with Dirt and Debris
If the HEPA filter is clogged with dirt and debris then it prevents the Ilife robot vacuum from operating. This can also be due to dust, a blocked hose, or a jammed brush roll.
Front Bumper Is Not in Right Position
It very often happens that the front bumper of an Ilife robot vacuum is covered by dirt and debris inside that is a great problem and it can get stuck and limit the cleaning time of the vacuum.
If the front bumper does not in the right position, then it makes obstucle to move the robot vacuum.
Fixes to Ilife Robot Vacuum that keeps stopping
When you face any stopping problems with your Ilife automatic vacuum cleaner then don’t be panic. There are solutions to every problem like stopping one.
Use these tricks to fix your Ilife Robot Vacuum that has been stopped:
Check the Obstacles That Are Stuck with Robot Vacuum
If there are obstacles that are stuck with a robot vacuum cleaner then it will not be able to clean the edges of the carpet and some ground-in dirt on the floor.
Besides this, you have to be careful because of its driving system which is different from that of a human.
When an Ilife Robot Vacuum stops completely or it slows down and pauses for a few seconds before continuing on the job, this is due to the fact that it senses obstacles.
The robot vacuum stops completely before moving again in order to avoid hitting or bumping into them while cleaning.
Clean the Brush Roller
Clean the brush roller periodically or replace it if it stops spinning by getting totally damaged.
Fixing the clogged brush roller of your Ilife Robot Vacuum is a pretty simple task, but it is important to know how to do it.

The most common cause for the brush roller stopping is that part of the roller gets stuck underneath the vacuum due to clogging.
A common fix for this issue is to take off both side panels on your Ilife Robot Vacuum and peel them apart from each other.
It will provide you with access to the brush roller, which can then be fixed or replaced if necessary.
Your Robot Vacuum Battery Need to Be Changed
An estimated one-third of all households own or use an automated vacuum cleaner but even though they are highly efficient at doing their job, many consumers notice that these machines sometimes stop unexpectedly or need to be reset when battery power runs low.
If your Ilife robot vacuum cannot perform then recharge it for recommended hours and then try to use but if it still cannot move then it must be the reason for the damaged battery.
In such a case, you have to replace the robot battery immediately to make it work again.
Remove the Front Bumper and Reset It
Remove the front bumper from your Ilife robot vacuum, clean it properly and reset it if the earlier position was not appropriate then it will be fixed.
This will also allow to clean more the inside of the vacuum to enter the tube and provide more suction power to clean any hard surface.
Removing the bumper also prevents damage from being done to other delicate objects in your home.
Replace the Robot Vacuum Battery
Let’s talk about the battery problems that have been causing the Ilife robot vacuum to stop working.

The Ilife robot vacuum can be fixed by replacing the damaged battery with one that is capable of running the device perfectly which means you have to take the one that matches the required amp and volt as well.
Clean the Cliff Sensors
Cliff sensors work to find out the surface whether it is a wet, dry, large gap, or huge high or low position. If dirt and debris get stuck over the sensors then they will not work even it has enough battery power.

To make the Ilife robot vacuum work again clean the cliff sensors properly and enjoy the super cleaning performance back!
Final Words
All machines can get problems. When it comes to Ilife robot vacuum cleaners, they can get problem too. Sometimes they don’t work and stop working intermittently and leave their users frustrated and disappointed.
We have discussed all the possible reasons for the Ilife vacuum cleaners’ failure and the fixes as well.
If you read the whole content carefully, it is definitely possible for you to overcome the stopping issue of an Ilife robot vacuum cleaner and lead a neat and tidy environment.
Leave a Reply