The Dyson Ball is a popular vacuum cleaner, but recently, many users have reported that their Dyson Ball does not pick up loose dirt and debris. And when it comes to cleaning the house or office, it is easy to understand how frustrating this could be.
However, there are some common problems that usually happen to the users and also, almost all those problems could be fixed by yourself.
In this post we are going to reveal all the possible causes for why your Dyson Ball vacuum is not picking up properly and how to fix them.
Table of Contents
Dyson Ball Not Picking Up -Common Problems and Fixes
Dyson’s Ball vacuum cleaner is one of the most powerful and innovative appliances in the market. The vacuum has a unique design that allows it to clean in all directions but users report that sometimes it cannot pick up dirt and debris.
Below are the problems that normally face the users and their fixes as well:
Brush bar Not Moving
The Dyson Ball vacuum cleaner has a rotating brush bar made of rubber that is located in the center of the cleaner’s ball. This brush bar is supposed to be able to collect pet hair, dust and other debris from the air that is drawn into the vacuum cleaner.
If there are hairs or others long dirty things clogged over the roller brush then it will not be able to turn the brush roll and the vacuum fails to pick up dirt. On the other hand, if the brush bar does not fit into slot, then it also cannot pick up well.
To fix this, clean the clogged brush roll and reassemble it if it does not be in the slot perfectly.
Lost Suction
The vacuum’s suction power is reduced because of the rotating brush which helps in cleaning carpets but causes less suction power when used on hard surfaces like tile or wood floors.
For many reasons of your Dyson Ball not picking, suction loss is an important one. If the motor cannot turn the brush bar in a normal way, then suction lose appears.
And full dirt bin or bag is also responsible for suction loss. Another cause of suction loss is that the filter is dirty enough.
To make the Dyson Ball work like a new one, properly clean the brush bar and filters then it will get back its suction power again and work properly.
Broken Airflow
When it happens that the airflow of your Dyson Ball vacuum is not sufficient the it cannot pick up enough dirt and the leakages can be found in the hose. This can be caused by a huge usage or external scratches.
To get rid of this problem do check the vacuum hose thoroughly and change it if necessary.
Overheating Problem
It would be impossible for any device to be able to pick up all the dirt around the home without some malfunctioning. So, they made a safety mechanism in case something goes wrong.
This safety mechanism will detect overheating and turn off the machine before it can cause any damage or injury when you are using your vacuum cleaner on normal mode.
Try to be safe with not using a Dyson Ball vacuum continuously rather take a brake while cleaning a huge area.
Faulty Power Cord
When it comes to vacuum cleaners, the power cord is what lets you do your cleaning. You just have to plug it in and start cleaning. But, if that power cord isn’t doing its job properly, then you’ll be doing more scrubbing than vacuuming.
It can be damaged after using a long period of time and then it is better to replace the cord because a power cord is a very important component that supply the power and any damages can make a serious accident.
Motor Malfunction
Motor Malfunction, the cause of Dyson Ball Not Picking Up, is when the motor doesn’t work. This can happen because of any number of things, like a clog or a wire getting caught on something.
It is very often happened that a Dyson Ball Vacuum is not Picking up dirt when it comes to picking up dirt from carpets or any other surface. If you are experiencing similar issues with your Dyson vacuum cleaner, we think it is most probably the result of the motor’s malfunction.
When a clog is in between the brush head and floor head it can’t pick up anything leading to no suction and lack of momentum for your cleaning session. One reason that this might happen is if the brush head comes off from the motor shaft.
Damaged Filter
Most people don’t know that the Dyson Ball not picking up can be caused by a damaged filter. Sometimes the filter might be heavily clogged with debris. Try to clean the filter first if it helps.
If your filter is damaged, it can cause all sorts of issues including an inability to pick up debris in the vacuum cleaner.
Your vacuum cleaner might also be running slower than usual due to this problem. If this happens, you’ll need to replace the filter with a new one.
Full Dirt Bin or Bag
What happens if your Dyson Ball vacuum cleaner isn’t picking up dirt anymore? A few things could be going wrong with the vacuum. One of the common causes is the dirt bin is full and needs to be emptied.
If such thing happens with the one you have then you should regularly empty the dirt bin to get rid of the not picking problem again!
Improper Assembling
Dyson Ball Not Picking Up? This is a common issue that has been happening with Dyson Ball. The most common reason for this issue is improper assembly.
The Dyson Ball is a vacuum cleaner that has technology that captures dirt from every surface and even from hard floors, which makes it an ideal tool for cleaning pet hair, dust, and other debris from carpets.
It also features a rotating head to give you the flexibility of using it as a handheld or stationary vacuum cleaner.
So, to get the proper performance from your Dyson Ball vacuum cleaner, assemble it accordingly and reassemble it if you find settings of any parts improperly.
Where is the reset button on a Dyson Ball vacuum?
The reset button on a Dyson Ball vacuum is located on the handle just above the body or in a slot of its head that makes it more convenient for users since they are very convenient to find.
Conclusion
If you have a Dyson Ball vacuum cleaner and you are experiencing difficulty in picking up dirt, there are possible reasons and fixes as well that we have discussed above.
And if it cannot be possible to fix any problem of your vacuum then it would be better you contact their customer service department for further help.
Leave a Reply