If your Ilife vacuum goes in circles but you cannot figure out why you are in the right place where we are going to talk about the reasons that cause this problem and simultaneously discuss all the ways that can fix the issue.
There are different causes of why an Ilife vacuum cleaner isn’t doing what it should be doing. So, before you replace the vacuum with a new one or do anything else, make sure that you have checked all of the possible causes and have fixed them accordingly.
Causes That Make an Ilife Robot Vacuum Go in Circles
It really creates a hassle while your Ilife robot vacuum cleaner is going in circles and it is not working to clean the whole room that has to be clean.
The causes that make an Ilife vacuum go in circles are:
Issues On the Wheels
The first thing that can cause an Ilife robot vacuum to move in a circle is that there is issues with the wheels. If your Ilife robot vacuum wheels become clogged and do not
The wheels are too tight or one of them is malfunctioning or jammed and if one of the wheels is jammed, the robot may run in circles because the stuck wheel can still move.
Setting the Boundary Line Mode
Your Ilife robot vacuum cleaner can move in a circle if you set the ‘Boundary Line’ mode without knowing the outcome or seeing what happens. In such settings, the Ilife vacuum cleaner will go in circles due to the command has been set.
Cliff Sensors Are Dirty
If the Ilife’s cliff sensors are dirty, it will be unable to identify edges or stairs and may make a lot of circles or go in one circle.
Again, if the device works in a dark environment, then it cannot see the edges of stairs or any other unusual edges and work in the same area again and again.
Stuck Bumpers
Using an Ilife robot vacuum cleaner for a long time it is very common that some dirt and debris stuck in the bumpers and the unit is going in the same circle it starts.
There are sensors on the bumpers that help the device sensing how dense the dirt is there on a surface and direct the unit where to move or not.
When the sensors are overlapped with dirt then they cannot work properly and also, they ultimately fail to command the unit to move in the right path thus it goes in the circle.
Maximum suction Mode
Maximum suction is required for a unit when it is cleaning a very dirty surface or area but sometimes it can make a problem for the Ilife robotic vacuum that it starts to go in the same circle again and again.
So, use the maximum suction mode when and where it is actually needed.
Software Issues
If your device is not using the updated firmware software then sometimes it may work like it is drunk for example, it will be stuck in an area or go circle in the same empty space.
If it happens with you then try to update the software with its latest operating software to make it perform again.
Fixes to Ilife Robot Vacuum Going in Circles Problem
The Ilife Vacuum Going in Circles Problem is the name given to an issue of the vacuum cleaner that goes in circles.
In order to fix the issue, below are the possible fixes that can help you restore the device working great again.
Cleaning the Bumpers
Ilife vacuum problems usually happen because there is a clog in the bumpers.
However, if you want to try and solve your Ilife vacuum problem yourself before calling for help, you should try using a plunger to unclog the bumpers or if that doesn’t work, call for an expert technician from the team of Ilife Vacuum Repair service center.
Clean the Bumper sensors
Going into the circle of an Ilife vacuum cleaner can be confusing for you and your family members. This is caused by dust that has accumulated on the bumper sensors.
Some dust particles are too large to be captured by the suction of the vacuum cleaner and they will get stuck on these sensors. The solution is to clean them out or replace them with new ones.
Checking the Wheels
When a vacuum cleaner rotates while cleaning or while emptying, there many dirt and debris lodged on one or both wheels during cleaning.
One cause of this is clogs of dirt, dust, and hair on different parts of one or both wheels that have been missed by earlier cleaning attempts.
If you notice your Ilife vacuum is moving in circles then check the wheels whether they are clogged or not. Clean the wheels if there is any dirt or debris to perform it great again.
Reset the Cliff Sensors
The main problem that Ilife vacuum users face is when it goes into a circle and this happens because the cliff sensor senses that something is blocking its path.
In some cases, this may be an animal or other small object while in others, it may be because of dust particles or dirt on the ground.
The cliff sensors need to reset to restore normal operation. So, you need to make sure they are clean before trying to clean again.
Checking the Motherboard
The motherboard is the main hardware of an Ilife robot vacuum cleaner. It is an electronic circuit board on which vacuum components such as the processing unit, memory, and other necessary circuitry are mounted.
The motherboard also connects to various peripheral devices such as network interfaces, USB ports, and so on.
To fix the Ilife robot vacuum going in Circle which will show if the issue lies with the motherboard or other hardware-related issues. If that doesn’t help then you should contact your technician for further assistance with hardware-related issues.
Reset and Update the Software
To fix an Ilife vacuum cleaner’s going in circle’ problem, you can reset the unit because there may be a settings problem and update the software to make it work again.
Updating the software fixes bugs in the base software that helps in working the device normally when it gets any software-related problems.
Conclusion
In this modern era, owning self-cleaning vacuums like the Ilife robot vacuum cleaner is a must! Not only do they help keep our homes free of dirt and dust that would otherwise accumulate on the flooring, but they also save on time and effort.
But sometimes the Ilife vacuum creates problems by going in circles or backwards.
In this article, we have shown how to get over the going in circle problem of an Ilife vacuum cleaner and all the possible preventive ways that help you from happening again.
Hope you found all the information helpful and do not be hesitated to leave your comment if you have any suggestions or further queries.
Leave a Reply