Keeping up with the normal household chores is difficult with a malfunctioning vacuum cleaner. However, there are some simple fixes and troubleshooting tips to get your vacuum cleaner back on its feet again.
The most important thing you should remember is that when your vacuum cleaner stops working, it’s usually not just one thing that’s wrong.
It might be something as simple as dirty filters or an electrical wire unplugged from the power outlet. You should always start by checking your vacuum cleaner before calling for its repair service.
Keep reading to know all the possible reasons that are responsible for making a vacuum cleaner stop performing and fixes as well.
Causes that Make a Vacuum Cleaner Stop Working and Fixes
The vacuum cleaner is an essential household tool for cleaning up the mess of our homes. However, it can sometimes malfunction due to different reasons.
Here are some of the reasons that make a vacuum cleaner not work:
Faulty Power Switch
Vacuum cleaners have power switches that stop working after a few years due to water damage.
Usually, the power switch of a vacuum cleaner is situated on the front of the appliance and if it gets expired then the switch cannot be repositioned and the vacuum cleaner will no longer function.
So, you should check out the first thing while it will be not working is the power switch if it is normal or not!
Faulty Cord
The second thing that can make your vacuum cleaner stop cleaning is the power cord because if it gets damaged the power could not be reached to the unit and thus it cannot perform.
On the other hand, dirt that accumulates on the power cord of your vacuum cleaner would eventually cause it to no longer work correctly which means that it becomes harder for you as well as for other people in your home to clean up the messes in their homes as well as their clothes.
If you find that the power cord is abnormal then just replace it.
To be safe, check out the power cord every week so you will never have to worry about not being able to use your vacuum cleaner again!
Damaged Battery
A damaged battery is a reason for a vacuum cleaner not working. If a battery has been drained by leaving it uncharged for too long, it can be hard to get it to work again as the cells in the battery are dead.
The vacuum cleaner will have low suction power and start to lose its charge quickly.
When a battery gets damaged, it can have detrimental effects on the vacuum cleaner. So, change the battery as soon as possible if your machine discharge so quickly.
Faulty Motor
If a vacuum cleaner cannot perform then a damaged motor can be responsible for the inconvenience.
Many people might be convinced that if their vacuum cleaner has not been working for a long time now, it needs to be replaced. However, this is not the case. In fact, the vacuum cleaner may just need a replacement of its motor.
Leakages in Air Flow
Air filter supplies the necessary airflow to the unit so that it can make the suction to get into the dirt and debris a vacuum cleaner cleans. If there are any leakages in the hose then it flows down in the supply of air into the unit and thus it loses its suction power and cannot clean like normally it does.
Seal the leakages to get back the machine working well again.
Jammed Belt
Another important reason why the vacuum cleaner does not work is the jammed belt. The belt gets stuck on the rollers which makes it impossible for the suction power to operate normally.
Finding out where the belt is broken or jammed can remedy this problem as well as prevent it from happening again in the future.
This is a common issue that every homeowner will have to face at some point in time with their vacuum cleaner.
If the dust does not come out of your vacuum cleaner, and you can’t seem to fix the clog, you may want to turn to your local service center or repair shop for help instead of trying to remove the blockage by yourself.
Rotating Brush Not Spinning
Another reason why your vacuum is not working well could be that the brush is rotating but not spinning when you turn on your machine. A clog can happen when hair, dirt, and other debris build up in the vacuum cleaner’s hose or filter.
You should clean the filter and the hose if needed. You should know that a clogged filter and hose can make a vacuum cleaner smell bad or sometimes it smells like a wet dog.
The rotating brush can be stopped spinning or it might be that the brush roll is clogged with hardened debris. In both cases, you will need to clean the clogs or change the belt or the brush roll.
Clogged Hose
Blockages in the dirt hose are one of the common reasons why vacuum cleaners fail to work. A clogged hose can cause an otherwise quick-moving suction to stop working properly.
This can be especially problematic when you need your vacuum cleaner to maintain a certain level of suction on a given surface area.
The other issue with the clogged hose is that it makes it difficult for the vacuum cleaner to move around and clean effectively.
If you have carpet, you risk damaging your flooring or getting stuck in a corner. In rare cases, this could even lead to injury if you are trying to maneuver around furniture or another object at speed.
So, check the hose if it gets clogged or not to make sure of the normal performance each time you use the vacuum cleaner.
Full Dirt Bag
The full dirtbag is an accumulation of dust in the bag that has been vacuumed up by a machine. The problem with this type of dirtbag is that it can cause clogs in the suction tube, causing the vacuum cleaner not to work properly.
To get rid of not working a vacuum cleaner, empty the dirt bin or bag regularly and clean it if necessary.
Final Words
Vacuum cleaners have been an integral part of our daily lives for many decades now. However, there are times when the vacuum cleaner doesn’t work properly and you have to figure out what went wrong.
In this article, we talked about the reasons for the vacuum cleaners not working and how to fix it and hope you found it helpful enough!
Leave a Reply